Elvatech ElvaX PmX-5050
$3,890.00
$3,890.00
SKU:
ElvaX PmX is an online elemental analyzer of heavy metals in the ambient air.
There is a growing concern about the health impact of particulate matter (PM) in the air. Previous solutions for PM monitoring were able to get only total amount of particles in the air. But for a complete understanding of health impact and air pollution source appointment element analysis of PM is necessary.
ElvaX PmX is a fully stand-alone device for continuous analysis of particulate matter elemental composition.
Features
Online analysis of PM elemental concentration;
Full compliance with the EPA IO-3.3 standard;
Up to 3 month of stand-alone continuous operation;
Automatic correction of influence of ambient temperature, humidity and pressure;
Heated sampling table for prevention of condensing;
Simple calibration procedure and tape replacement;
Intuitive software interface;
Specifications
Common
Applicable standard
USA EPA IO-3.3
Flow rate
(0~20) L/min
Filter tape
PTFE
Tape replacement interval
up to 3 months
Power supply
AC 100V~240V, 50/60 Hz
Power consumptio
200 W
Dimensions (w/o sampling pipe)
500mm * 500mm * 450mm
Weight (w/o sampling pipe)
30 kg
External connection
USB, Ethernet
XRF unit
X-Ray tube
50W, 50kV, 3mA
Primary beam filter changer
5 positions, automatic
X-Ray detector
SDD
Detectable elements
see fig. 1
Sampling and analysis times
3 ~ 1440 min
Measurement range
0 ~ 200 µ g/m3
Detection limit
see table 1
Calibration samples
SS316 for energy calibration, NIST 2783 for concentration calibration, other samples(optional)
Environmental conditions
Ambient temperature
0 ° C ~ 40 ° C
Humidity
0 ~ 80%
Altitude
up to 1000m
There is a growing concern about the health impact of particulate matter (PM) in the air. Previous solutions for PM monitoring were able to get only total amount of particles in the air. But for a complete understanding of health impact and air pollution source appointment element analysis of PM is necessary.
ElvaX PmX is a fully stand-alone device for continuous analysis of particulate matter elemental composition.
Features
Online analysis of PM elemental concentration;
Full compliance with the EPA IO-3.3 standard;
Up to 3 month of stand-alone continuous operation;
Automatic correction of influence of ambient temperature, humidity and pressure;
Heated sampling table for prevention of condensing;
Simple calibration procedure and tape replacement;
Intuitive software interface;
Specifications
Common
Applicable standard
USA EPA IO-3.3
Flow rate
(0~20) L/min
Filter tape
PTFE
Tape replacement interval
up to 3 months
Power supply
AC 100V~240V, 50/60 Hz
Power consumptio
200 W
Dimensions (w/o sampling pipe)
500mm * 500mm * 450mm
Weight (w/o sampling pipe)
30 kg
External connection
USB, Ethernet
XRF unit
X-Ray tube
50W, 50kV, 3mA
Primary beam filter changer
5 positions, automatic
X-Ray detector
SDD
Detectable elements
see fig. 1
Sampling and analysis times
3 ~ 1440 min
Measurement range
0 ~ 200 µ g/m3
Detection limit
see table 1
Calibration samples
SS316 for energy calibration, NIST 2783 for concentration calibration, other samples(optional)
Environmental conditions
Ambient temperature
0 ° C ~ 40 ° C
Humidity
0 ~ 80%
Altitude
up to 1000m
